How To Stop the Nonstop Flushing
Commercial toilets are prone to quirks and constant maintenance, likely due to their continual usage. One of the more common issues is that of nonstop flushing which may occasionally lead to toilet overflow. The seemingly endless flushing is often caused by sediment in the gasket and a blocked weeping hole. The fix, thankfully, is quite simple.
1. Turn Off the Water
Before you can clean the gasket, you will need to turn off the water, which not only prevents a possible toilet flood, it also keeps you dry during the repair process. There should be a screwdriver slot somewhere along the handle shaft. Turn the screw to stop the water supply.
2. Remove Lid and Flange Cover
Using a wrench, you can remove the lid from the flange cover. Once the bolt on top is loose, you can remove it and the now exposed flange cover. You will likely notice a lot of sediment on the gasket which has been instigating your toilet overflow.
3. Clean the Gasket and Weep Hole
To stop a toilet from perpetual flushing, you will need to clean the gasket by first removing it and then running it under the faucet. Make sure that all debris is clear and that the weeping hold is visible and unclogged. You can use a pin or something small to free any potential blockages before returning the gasket.
4. Call a Professional If Problem Persists
If sediment is not the problem, then you may need to call a plumbing specialist in the West Falmouth, ME, area to inspect the toilet and the lines. While a thorough cleaning is often what is needed, there are times when the fixture needs to be replaced, or when there are other issues in the lines.
Commercial toilets require continuous maintenance to prevent toilet overflow and ensure functionality. If you have a toilet that won’t stop running, then try cleaning the gasket, but if that doesn’t work, then turn to the professionals.